• 2-Part
• Acrylic Resin
• Room-Temperature Curing

This paint requires just a single coat to achieve cutting oil resistance equivalent to that of two-coat two-part curing paints, dramatically streamlining coating processes.
This new-generation coating agent offers versatility, extreme toughness, and friendliness both to humans and the environment.

• 1-Part
• Acrylic Resin
• Room-Temperature Curing

EAQ is a water-based antistatic paint that features exceptional total light transmittance and low haze value.
It imparts long-lasting ESD protection to your products while preserving their aesthetic qualities.

• Epoxy Resin
• Standard temperature curing type
• Low temperature curing type

REGARD RE, an epoxy resin-based powder paint cured using amine-based curing agents, offers excellent corrosion and chemical resistance. A thick coat can be obtained with a single application with minimal loss of paint material, thereby facilitating quality and process management.

• Polyester Resin
• Standard temperature curing type
• Low temperature curing type

REGARD RP, a polyester resin-based powder paint cured using blocked isocyanate, offers excellent weatherability and corrosion resistance. Even a thin coat produces a beautiful finish, and gloss can be adjusted to create the desired effect.

• Epoxy Polyester Resin
• Standard temperature curing type
• Low temperature curing type

REGARD RH, a hybrid powder paint product, offers an ideal balance between the corrosion resistance of epoxy resins and the weatherability of polyester resins. It offers superb workability, minimal risk of surface irregularities for both thick and thin coatings, as well as excellent chemical resistance.

• Epoxy Polyester Resin
• Standard temperature curing type

REGARD RC, a powder paint characterized by high electrical conductivity, is ideal for coating products that must meet static control requirements. To achieve reliable performance in terms of electrical conductivity, electrical resistance has been adjusted to be on the order of 104 Ω.

• 1-Part
• Acrylic Resin
• Room-Temperature Curing

AQUA RECOAT, a water-based paint, offers high environmental sustainability through providing sidewalls of recycled tires with textures comparable to new tires, thereby promoting the reuse of tires and reducing waste tire volumes.
With growing demand for recycled tire services, AQUA RECOAT is the ideal solution for regrooving and retreading used tires.

• 2-Part
• Modified Epoxy Resin
• Room-Temperature Curing

The strong finish coating achieved with the epoxy polyol + isocyanate combination exhibits superior resistance to cutting oils.
This product contains no amines, which are known to be strong skin irritants.
The total concentration of toluene, xylene, MIBK, and styrene has been kept below 0.1 %.This coating offers high environmental sustainability and minimal environmental impact.

• 2-Part
• Special Acrylic Urethane Resin
• Room-Temperature Curing

This paint offers high antimicrobial performance.Apply this paint to inhibit the growth of microbes (e.g., Escherichia coli, Staphylococcus aureus) and to keep your finished products clean and sanitary.
The total concentration of toluene, xylene, MIBK, and styrene has been kept below 0.1 %.This coating offers high environmental sustainability and minimal environmental impact.

• 1-Part
• Vinyl type
• Room-Temperature Curing

A universal primer with superior adhesion properties, even usable for non-ferrous metals that are conventionally difficult to adhere to.
The total concentration of toluene, xylene, MIBK, and styrene has been kept below 0.1 %.This coating offers high environmental sustainability and minimal vironmental impact.